dmesg - dual xeon 5130+7GiB ram+128G-840-pro
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.11.0-15-generic (buildd@batsu) (gcc version 4.8.1 (Ubuntu/Linaro 4.8.1-10ubuntu8) ) #23-Ubuntu SMP Mon Dec 9 18:17:04 UTC 2013 (Ubuntu 3.11.0-15.23-generic 3.11.10)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009a7ff] usable
BIOS-e820: [mem 0x000000000009a800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000ce000-0x00000000000cffff] reserved
BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bff4ffff] usable
BIOS-e820: [mem 0x00000000bff50000-0x00000000bff60fff] ACPI data
BIOS-e820: [mem 0x00000000bff61000-0x00000000bff7ffff] ACPI NVS
BIOS-e820: [mem 0x00000000bff80000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001ffffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.4 present.
DMI: IBM 922862M/9228, BIOS IBM BIOS Version 1.42-[C3E142AUSS11420]- 12/06/2007
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x200000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-DFFFF uncachable
E0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0C0000000 mask FC0000000 uncachable
1 base 000000000 mask E00000000 write-back
2 base 0BFF80000 mask FFFF80000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 3GB, range: 1GB, type UC
reg 1, base: 0GB, range: 8GB, type WB
reg 2, base: 3145216KB, range: 512KB, type UC
total RAM covered: 7167M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1M num_reg: 4 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3145216KB, range: 512KB, type UC
reg 3, base: 4GB, range: 4GB, type WB
e820: update [mem 0xbff80000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xbff50 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f6a30-0x000f6a3f] mapped at [ffff8800000f6a30]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000094000] 94000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fd1000, 0x01fd1fff] PGTABLE
BRK [0x01fd2000, 0x01fd2fff] PGTABLE
BRK [0x01fd3000, 0x01fd3fff] PGTABLE
init_memory_mapping: [mem 0x1ffe00000-0x1ffffffff]
[mem 0x1ffe00000-0x1ffffffff] page 2M
BRK [0x01fd4000, 0x01fd4fff] PGTABLE
init_memory_mapping: [mem 0x1fc000000-0x1ffdfffff]
[mem 0x1fc000000-0x1ffdfffff] page 2M
init_memory_mapping: [mem 0x180000000-0x1fbffffff]
[mem 0x180000000-0x1fbffffff] page 2M
BRK [0x01fd5000, 0x01fd5fff] PGTABLE
init_memory_mapping: [mem 0x00100000-0xbff4ffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xbfdfffff] page 2M
[mem 0xbfe00000-0xbff4ffff] page 4k
init_memory_mapping: [mem 0x100000000-0x17fffffff]
[mem 0x100000000-0x17fffffff] page 2M
BRK [0x01fd6000, 0x01fd6fff] PGTABLE
RAMDISK: [mem 0x35eb0000-0x36f4ffff]
ACPI: RSDP 00000000000f69c0 00014 (v00 PTLTD )
ACPI: RSDT 00000000bff5af5c 0003C (v01 PTLTD RSDT 06040000 LTP 00000000)
ACPI: FACP 00000000bff60dcd 00074 (v01 INTEL TUMWATER 06040000 PTL 00000003)
ACPI: DSDT 00000000bff5c384 04A49 (v01 Intel BLAKFORD 06040000 MSFT 0100000E)
ACPI: FACS 00000000bff61fc0 00040
ACPI: APIC 00000000bff60e41 00090 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: MCFG 00000000bff60ed1 0003C (v01 PTLTD MCFG 06040000 LTP 00000000)
ACPI: BOOT 00000000bff60f0d 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: ASF! 00000000bff60f35 000CB (v16 IBM 01000000 00000000)
ACPI: SSDT 00000000bff5af98 013EC (v01 PmRef CpuPm 00003000 INTL 20050228)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x00000001ffffffff]
Initmem setup node 0 [mem 0x00000000-0x1ffffffff]
NODE_DATA [mem 0x1ffff7000-0x1ffffbfff]
[ffffea0000000000-ffffea0007ffffff] PMD -> [ffff8801f8600000-ffff8801ff5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x1ffffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x00099fff]
node 0: [mem 0x00100000-0xbff4ffff]
node 0: [mem 0x100000000-0x1ffffffff]
On node 0 totalpages: 1834729
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3993 pages, LIFO batch:0
DMA32 zone: 12222 pages used for memmap
DMA32 zone: 782160 pages, LIFO batch:31
Normal zone: 16384 pages used for memmap
Normal zone: 1048576 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x03] address[0xfec80000] gsi_base[24])
IOAPIC[1]: apic_id 3, version 32, address 0xfec80000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x0009a000-0x0009afff]
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000cdfff]
PM: Registered nosave memory: [mem 0x000ce000-0x000cffff]
PM: Registered nosave memory: [mem 0x000d0000-0x000e3fff]
PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]
PM: Registered nosave memory: [mem 0xbff50000-0xbff60fff]
PM: Registered nosave memory: [mem 0xbff61000-0xbff7ffff]
PM: Registered nosave memory: [mem 0xbff80000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
PM: Registered nosave memory: [mem 0xfec00000-0xfec0ffff]
PM: Registered nosave memory: [mem 0xfec10000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff8801ffc00000 s86720 r8192 d23872 u524288
pcpu-alloc: s86720 r8192 d23872 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1806038
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7124100K/7338916K available (7149K kernel code, 1082K rwdata, 3312K rodata, 1364K init, 1420K bss, 214816K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-255.
NR_IRQS:16640 nr_irqs:1024 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 29360128 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
tsc: Fast TSC calibration using PIT
tsc: Detected 1999.959 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 3999.91 BogoMIPS (lpj=7999836)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring enabled (TM2)
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 28K (ffffffff81e65000 - ffffffff81e6c000)
ACPI: Core revision 20130517
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27844 entries in 109 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz (fam: 06, model: 0f, stepping: 06)
Performance Events: PEBS fmt0-, 4-deep LBR, Core2 events, Intel PMU driver.
perf_event_intel: PEBS disabled due to CPU errata
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 OK
Brought up 4 CPUs
smpboot: Total of 4 processors activated (16000.71 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xbff61000-0xbff7ffff] (126976 bytes)
regulator-dummy: no parameters
RTC time: 21:08:03, date: 01/06/14
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-0b] at [mem 0xe0000000-0xe0bfffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe0bfffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130517/hwxface-571)
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000dc000-0x000dffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000e0000-0x000e3fff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0xc0000000-0xfdffffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-0b] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:25c0] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:25e2] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:25e3] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:04.0: [8086:25fa] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:25e5] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: [8086:25e6] type 01 class 0x060400
pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
pci 0000:00:06.0: System wakeup disabled by ACPI
pci 0000:00:07.0: [8086:25e7] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:10.0: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.1: [8086:25f0] type 00 class 0x060000
pci 0000:00:10.2: [8086:25f0] type 00 class 0x060000
pci 0000:00:11.0: [8086:25f1] type 00 class 0x060000
pci 0000:00:13.0: [8086:25f3] type 00 class 0x060000
pci 0000:00:15.0: [8086:25f5] type 00 class 0x060000
pci 0000:00:16.0: [8086:25f6] type 00 class 0x060000
pci 0000:00:1b.0: [8086:269a] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0400000-0xf0403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:2690] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:2688] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io 0x1800-0x181f]
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1d.1: [8086:2689] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io 0x1820-0x183f]
pci 0000:00:1d.1: System wakeup disabled by ACPI
pci 0000:00:1d.2: [8086:268a] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io 0x1840-0x185f]
pci 0000:00:1d.2: System wakeup disabled by ACPI
pci 0000:00:1d.3: [8086:268b] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io 0x1860-0x187f]
pci 0000:00:1d.3: System wakeup disabled by ACPI
pci 0000:00:1d.7: [8086:268c] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xf0404000-0xf04043ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:2670] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.1: [8086:269e] type 00 class 0x01018f
pci 0000:00:1f.1: reg 0x10: [io 0x18a0-0x18a7]
pci 0000:00:1f.1: reg 0x14: [io 0x1894-0x1897]
pci 0000:00:1f.1: reg 0x18: [io 0x1898-0x189f]
pci 0000:00:1f.1: reg 0x1c: [io 0x1890-0x1893]
pci 0000:00:1f.1: reg 0x20: [io 0x1880-0x188f]
pci 0000:00:1f.2: [8086:2681] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x18b8-0x18bf]
pci 0000:00:1f.2: reg 0x14: [io 0x18ac-0x18af]
pci 0000:00:1f.2: reg 0x18: [io 0x18b0-0x18b7]
pci 0000:00:1f.2: reg 0x1c: [io 0x18a8-0x18ab]
pci 0000:00:1f.2: reg 0x20: [io 0x18c0-0x18df]
pci 0000:00:1f.2: reg 0x24: [mem 0xf0404400-0xf04047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:269b] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io 0x1100-0x111f]
pci 0000:06:00.0: [8086:3500] type 01 class 0x060400
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.3: [8086:350c] type 01 class 0x060400
pci 0000:06:00.3: PME# supported from D0 D3hot D3cold
pci 0000:06:00.3: System wakeup disabled by ACPI
pci 0000:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:02.0: PCI bridge to [bus 06-0a]
pci 0000:07:00.0: [8086:3510] type 01 class 0x060400
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:07:00.0: System wakeup disabled by ACPI
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:07:01.0: [8086:3514] type 01 class 0x060400
pci 0000:07:01.0: PME# supported from D0 D3hot D3cold
pci 0000:07:01.0: System wakeup disabled by ACPI
pci 0000:07:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:06:00.0: PCI bridge to [bus 07-09]
pci 0000:07:00.0: PCI bridge to [bus 08]
pci 0000:07:01.0: PCI bridge to [bus 09]
pci 0000:06:00.3: PCI bridge to [bus 0a]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [10de:029d] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xce000000-0xceffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xcf000000-0xcfffffff 64bit]
pci 0000:02:00.0: reg 0x24: [io 0x2000-0x207f]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:04.0: bridge window [mem 0xce000000-0xcfffffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:0b:00.0: [14e4:1600] type 00 class 0x020000
pci 0000:0b:00.0: reg 0x10: [mem 0xf0200000-0xf020ffff 64bit]
pci 0000:0b:00.0: PME# supported from D3hot D3cold
pci 0000:0b:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.0: PCI bridge to [bus 0b]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:0c:03.0: [104c:8023] type 00 class 0x0c0010
pci 0000:0c:03.0: reg 0x10: [mem 0xf0304000-0xf03047ff]
pci 0000:0c:03.0: reg 0x14: [mem 0xf0300000-0xf0303fff]
pci 0000:0c:03.0: supports D1 D2
pci 0000:0c:03.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xfffffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 1F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
ACPI: bus type ATA registered
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009a800-0x0009ffff]
e820: reserve RAM buffer [mem 0xbff50000-0xbfffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x04d0-0x04d1] has been reserved
system 00:00: [io 0x0700-0x070f] has been reserved
system 00:00: [io 0x1000-0x107f] could not be reserved
system 00:00: [io 0x1180-0x11bf] has been reserved
system 00:00: [io 0xfe00] has been reserved
system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
system 00:00: [mem 0xfee00000-0xfee0ffff] could not be reserved
system 00:00: [mem 0xfec81000-0xfec81fff] has been reserved
system 00:00: [mem 0xfec81400-0xfec823ff] could not be reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: [dma 2]
pnp 00:07: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:09: Plug and Play ACPI device, IDs BCM0101 (active)
pnp: PnP ACPI: found 10 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 0b] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 0b] add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:07:00.0: PCI bridge to [bus 08]
pci 0000:07:01.0: PCI bridge to [bus 09]
pci 0000:06:00.0: PCI bridge to [bus 07-09]
pci 0000:06:00.3: PCI bridge to [bus 0a]
pci 0000:00:02.0: PCI bridge to [bus 06-0a]
pci 0000:00:03.0: PCI bridge to [bus 01]
pci 0000:02:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:04.0: bridge window [mem 0xce000000-0xcfffffff]
pci 0000:00:04.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:06.0: PCI bridge to [bus 04]
pci 0000:00:07.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 0b]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xf0200000-0xf02fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0c]
pci 0000:00:1e.0: bridge window [mem 0xf0300000-0xf03fffff]
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:02: resource 1 [mem 0xce000000-0xcfffffff]
pci_bus 0000:02: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:0b: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:0b: resource 1 [mem 0xf0200000-0xf02fffff]
pci_bus 0000:0b: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]
pci_bus 0000:0c: resource 1 [mem 0xf0300000-0xf03fffff]
pci_bus 0000:0c: resource 4 [io 0x0000-0xffff]
pci_bus 0000:0c: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:1f.0: rerouting interrupts for [8086:2670]
PCI: CLS mismatch (32 != 64), using 64 bytes
pci 0000:02:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17024K (ffff880035eb0000 - ffff880036f50000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xbbf50000-0xbff50000] (64MB) mapped at [ffff8800bbf50000-ffff8800bff4ffff]
Simple Boot Flag at 0x3b set to 0x80
Scanning for low memory corruption every 60 seconds
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1389042482.628:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 13947
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:1c.0: irq 64 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 15
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
tsc: Marking TSC unstable due to TSC halts in idle
ACPI: acpi_idle registered with cpuidle
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max UDMA/100 cmd 0x18a0 ctl 0x1894 bmdma 0x1880 irq 18
ata2: PATA max UDMA/100 cmd 0x1898 ctl 0x1890 bmdma 0x1888 irq 18
ata2: port disabled--ignoring
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: setting latency timer to 64
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
ehci-pci 0000:00:1d.7: irq 16, io mem 0xf0404000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.11.0-15-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 3.11.0-15-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 9da89dd2daeca3a3cb171fe18502208f132adef8'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
Magic number: 14:710:145
ata_port ata2: hash matches
ata2: hash matches
acpi device:16: hash matches
rtc_cmos 00:03: setting system clock to 2014-01-06 21:08:03 UTC (1389042483)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
Freeing unused kernel memory: 1364K (ffffffff81d10000 - ffffffff81e65000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1032K (ffff8800016fe000 - ffff880001800000)
Freeing unused kernel memory: 784K (ffff880001b3c000 - ffff880001c00000)
systemd-udevd[118]: starting version 204
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
tg3.c:v3.132 (May 21, 2013)
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led pmp slum part
ahci 0000:00:1f.2: setting latency timer to 64
FDC 0 is a National Semiconductor PC87306
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
ata3: SATA max UDMA/133 abar m1024@0xf0404400 port 0xf0404500 irq 17
ata4: SATA max UDMA/133 abar m1024@0xf0404400 port 0xf0404580 irq 17
ata5: SATA max UDMA/133 abar m1024@0xf0404400 port 0xf0404600 irq 17
ata6: SATA max UDMA/133 abar m1024@0xf0404400 port 0xf0404680 irq 17
ata7: SATA max UDMA/133 abar m1024@0xf0404400 port 0xf0404700 irq 17
ata8: SATA max UDMA/133 abar m1024@0xf0404400 port 0xf0404780 irq 17
tg3 0000:0b:00.0 eth0: Tigon3 [partno(BCM95752) rev 6002] (PCI Express) MAC address 00:14:5e:1e:51:29
tg3 0000:0b:00.0 eth0: attached PHY is 5752 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
tg3 0000:0b:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:0b:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
firewire_ohci 0000:0c:03.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: ATA-9: Samsung SSD 840 PRO Series, DXM05B0Q, max UDMA/133
ata6.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata6.00: configured for UDMA/133
scsi 5:0:0:0: Direct-Access ATA Samsung SSD 840 DXM0 PQ: 0 ANSI: 5
sd 5:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 5:0:0:0: [sda] Write Protect is off
sd 5:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 5:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 >
sd 5:0:0:0: [sda] Attached SCSI disk
EXT4-fs (sda1): INFO: recovery required on readonly filesystem
EXT4-fs (sda1): write access will be enabled during recovery
firewire_core 0000:0c:03.0: created device fw0: GUID 1e5e140000002951, S400
usb 3-2: new low-speed USB device number 2 using uhci_hcd
EXT4-fs (sda1): orphan cleanup on readonly fs
EXT4-fs (sda1): 46 orphan inodes deleted
EXT4-fs (sda1): recovery complete
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 3-2: New USB device found, idVendor=046d, idProduct=c040
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: USB-PS/2 Optical Mouse
usb 3-2: Manufacturer: Logitech
Adding 3143676k swap on /dev/sda5. Priority:-1 extents:1 across:3143676k SSFS
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
usb 4-1: new low-speed USB device number 2 using uhci_hcd
systemd-udevd[349]: starting version 204
lp: driver loaded but no devices found
EDAC MC: Ver: 3.0.0
EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0
EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
tpm_tis: probe of 00:09 failed with error -5
intel_rng: FWH not detected
usb 4-1: New USB device found, idVendor=03f0, idProduct=0324
usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-1: Product: HP Basic USB Keyboard
usb 4-1: Manufacturer: LiteON
ACPI Warning: 0x0000000000001028-0x000000000000102f SystemIO conflicts with Region \_SB_.PCI0.LPC0.SIO_.Z003 1 (20130517/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
microcode: CPU0 sig=0x6f6, pf=0x4, revision=0x44
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
hidraw: raw HID events driver (C) Jiri Kosina
nvidia: module verification failed: signature and/or required key missing - tainting kernel
ppdev: user-space parallel port driver
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: loading NVIDIA UNIX x86_64 Kernel Module 304.117 Tue Nov 26 21:25:36 PST 2013
type=1400 audit(1389042485.101:2): apparmor="STATUS" operation="profile_load" parent=548 profile="unconfined" name="/sbin/dhclient" pid=553 comm="apparmor_parser"
type=1400 audit(1389042485.101:3): apparmor="STATUS" operation="profile_load" parent=548 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser"
type=1400 audit(1389042485.101:4): apparmor="STATUS" operation="profile_load" parent=548 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
type=1400 audit(1389042485.101:5): apparmor="STATUS" operation="profile_replace" parent=548 profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=553 comm="apparmor_parser"
type=1400 audit(1389042485.101:6): apparmor="STATUS" operation="profile_replace" parent=548 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
type=1400 audit(1389042485.101:7): apparmor="STATUS" operation="profile_replace" parent=548 profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=553 comm="apparmor_parser"
hda_codec: AD1981: BIOS auto-probing.
autoconfig: line_outs=1 (0x5/0x0/0x0/0x0/0x0) type:speaker
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Rear Mic=0x18
Front Mic=0x8
Line=0x9
CD=0x19
Aux=0x17
ics932s401 0-0069: ics932s401 chip found
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
usb 5-1: new full-speed USB device number 2 using uhci_hcd
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
init: avahi-cups-reload main process (534) terminated with status 1
type=1400 audit(1389042485.185:8): apparmor="STATUS" operation="profile_load" parent=550 profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=595 comm="apparmor_parser"
type=1400 audit(1389042485.185:9): apparmor="STATUS" operation="profile_load" parent=550 profile="unconfined" name="/usr/sbin/cupsd" pid=595 comm="apparmor_parser"
type=1400 audit(1389042485.185:10): apparmor="STATUS" operation="profile_replace" parent=550 profile="unconfined" name="/usr/sbin/cupsd" pid=595 comm="apparmor_parser"
gpio_ich: ACPI BAR is unavailable, GPI 0 - 15 unavailable
gpio_ich: GPIO from 206 to 255 on gpio_ich
microcode: CPU1 sig=0x6fb, pf=0x4, revision=0xb4
microcode: CPU2 sig=0x6f6, pf=0x4, revision=0x44
microcode: CPU3 sig=0x6fb, pf=0x4, revision=0xb4
input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input5
hid-generic 0003:046D:C040.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.1-2/input0
input: LiteON HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input6
hid-generic 0003:03F0:0324.0002: input,hidraw1: USB HID v1.00 Keyboard [LiteON HP Basic USB Keyboard] on usb-0000:00:1d.2-1/input0
microcode: Microcode Update Driver: v2.00 , Peter Oruba
kvm: disabled by bios
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
coretemp coretemp.0: Using relative temperature scale!
coretemp coretemp.3: Using relative temperature scale!
usb 5-1: New USB device found, idVendor=0d8c, idProduct=0103
usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 5-1: Product: USB Sound Device
usb 5-1: Manufacturer: C-Media INC.
usb_audio: Warning! Unlikely big volume range (=9472), cval->res is probably wrong.
usb_audio: [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1[ 2.619564] usbcore: registered new interface driver snd-usb-audio
init: failsafe main process (640) killed by TERM signal
tg3 0000:0b:00.0: irq 66 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
WARNING! power/level is deprecated; use power/control instead
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90002300000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x6f0 offMax=0x1a2e
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.2.16_Ubuntu (interface 0x001a0005).
vboxpci: IOMMU not found (not registered)
init: plymouth-splash main process (1202) terminated with status 1
init: plymouth-stop pre-start process (1285) terminated with status 1
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
tg3 0000:0b:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:0b:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
perf samples too long (2509 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
init: anacron main process (17220) killed by TERM signal
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:08: disabled
i8042 aux 00:08: System wakeup disabled by ACPI
serial 00:06: disabled
serial 00:06: System wakeup disabled by ACPI
i8042 kbd 00:05: System wakeup enabled by ACPI
sd 5:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 708.470 msecs
PM: late suspend of devices complete after 0.372 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 124.020 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 16
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Force enabled HPET at resume
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x6
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x7
CPU3 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 620.130 msecs
PM: early resume of devices complete after 0.171 msecs
snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
pci 0000:00:1e.0: setting latency timer to 64
lpc_ich 0000:00:1f.0: rerouting interrupts for [8086:2670]
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb3: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1d.3: setting latency timer to 64
usb usb5: root hub lost power or was reset
ehci-pci 0000:00:1d.7: setting latency timer to 64
ata_piix 0000:00:1f.1: setting latency timer to 64
ahci 0000:00:1f.2: setting latency timer to 64
ata2: port disabled--ignoring
i8042 kbd 00:05: System wakeup disabled by ACPI
serial 00:06: activated
ata5: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 4 SControl 300)
usb 4-1: reset low-speed USB device number 2 using uhci_hcd
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
firewire_core 0000:0c:03.0: rediscovered device fw0
sd 5:0:0:0: [sda] Starting disk
usb 3-2: reset low-speed USB device number 2 using uhci_hcd
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
snd-usb-audio 5-1:1.0: no reset_resume for driver snd-usb-audio?
snd-usb-audio 5-1:1.1: no reset_resume for driver snd-usb-audio?
PM: resume of devices complete after 1581.707 msecs
usb_audio: Warning! Unlikely big volume range (=9472), cval->res is probably wrong.
usb_audio: [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1
PM: Finishing wakeup.
Restarting tasks ... done.
tg3 0000:0b:00.0: irq 66 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:0b:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:0b:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Corrupted low memory at ffff880000007bf8 (7bf8 phys) = 8000cfc0000
------------[ cut here ]------------
WARNING: CPU: 0 PID: 46 at /build/buildd/linux-3.11.0/arch/x86/kernel/check.c:140 check_for_bios_corruption+0x10f/0x120()
Memory corruption detected in low memory
Modules linked in: pci_stub vboxpci(OF) vboxnetadp(OF) vboxnetflt(OF) vboxdrv(OF) vesafb(F) snd_usb_audio snd_usbmidi_lib coretemp kvm hid_generic gpio_ich snd_hda_codec_analog usbhid parport_pc nvidia(POF) hid ics932s401 ppdev snd_hda_intel snd_hda_codec snd_hwdep bnep snd_pcm rfcomm bluetooth snd_page_alloc snd_seq_midi snd_seq_midi_event snd_rawmidi microcode lpc_ich snd_seq psmouse serio_raw snd_seq_device snd_timer snd shpchp soundcore i5000_edac edac_core mac_hid i5k_amb i2c_scmi tpm_tis lp parport ahci firewire_ohci libahci firewire_core crc_itu_t tg3 ptp pps_core floppy
CPU: 0 PID: 46 Comm: kworker/0:1 Tainted: PF O 3.11.0-15-generic #23-Ubuntu
Hardware name: IBM 922862M/9228, BIOS IBM BIOS Version 1.42-[C3E142AUSS11420]- 12/06/2007
Workqueue: events check_corruption
0000000000000009 ffff8801f5015d30 ffffffff816e7335 ffff8801f5015d78
ffff8801f5015d68 ffffffff81061dcd 0000000000000000 ffff880000010000
ffffffff81ea73b0 0000000000000001 ffff880000000000 ffff8801f5015dc8
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt+0x4c/0x50
[] check_for_bios_corruption+0x10f/0x120
[] check_corruption+0xe/0x40
[] process_one_work+0x17c/0x430
[] worker_thread+0x11c/0x3c0
[] ? manage_workers.isra.25+0x2a0/0x2a0
[] kthread+0xc0/0xd0
[] ? kthread_create_on_node+0x120/0x120
[] ret_from_fork+0x7c/0xb0
[] ? kthread_create_on_node+0x120/0x120
---[ end trace ddced3e38d028997 ]---
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
device eth0 entered promiscuous mode
device eth0 left promiscuous mode
vboxnetflt: dropped 0 out of 201479 packets
show_signal_msg: 171 callbacks suppressed
mysql-workbench[1378]: segfault at 8 ip 00007f484d0d2c41 sp 00007fffc0b06ab8 error 4 in libc-2.17.so[7f484d049000+1bd000]
squashfs: version 4.0 (2009/01/31) Phillip Lougher
SQUASHFS error: Filesystem uses "lzma" compression. This is not supported
SQUASHFS error: Filesystem uses "lzma" compression. This is not supported
SQUASHFS error: Filesystem uses "lzma" compression. This is not supported
pcieport 0000:00:1c.0: System wakeup enabled by ACPI
PM: Syncing filesystems ... done.
PM: Preparing system for mem sleep
Freezing user space processes ... (elapsed 0.002 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
PM: Entering mem sleep
Suspending console(s) (use no_console_suspend to debug)
sd 5:0:0:0: [sda] Synchronizing SCSI cache
i8042 aux 00:08: disabled
i8042 aux 00:08: System wakeup disabled by ACPI
serial 00:06: disabled
serial 00:06: System wakeup disabled by ACPI
i8042 kbd 00:05: System wakeup enabled by ACPI
sd 5:0:0:0: [sda] Stopping disk
PM: suspend of devices complete after 739.476 msecs
PM: late suspend of devices complete after 0.366 msecs
ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
PM: noirq suspend of devices complete after 124.020 msecs
ACPI: Preparing to enter system sleep state S3
PM: Saving platform NVS memory
Disabling non-boot CPUs ...
smpboot: CPU 1 is now offline
smpboot: CPU 2 is now offline
Broke affinity for irq 12
Broke affinity for irq 16
Broke affinity for irq 17
Broke affinity for irq 18
smpboot: CPU 3 is now offline
ACPI: Low-level resume complete
PM: Restoring platform NVS memory
Force enabled HPET at resume
Enabling non-boot CPUs ...
smpboot: Booting Node 0 Processor 1 APIC 0x6
CPU1 is up
smpboot: Booting Node 0 Processor 2 APIC 0x1
CPU2 is up
smpboot: Booting Node 0 Processor 3 APIC 0x7
CPU3 is up
ACPI: Waking up from system sleep state S3
uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
PM: noirq resume of devices complete after 620.139 msecs
PM: early resume of devices complete after 0.171 msecs
snd_hda_intel 0000:00:1b.0: irq 65 for MSI/MSI-X
pci 0000:00:1e.0: setting latency timer to 64
lpc_ich 0000:00:1f.0: rerouting interrupts for [8086:2670]
uhci_hcd 0000:00:1d.1: setting latency timer to 64
usb usb3: root hub lost power or was reset
pcieport 0000:00:1c.0: System wakeup disabled by ACPI
uhci_hcd 0000:00:1d.0: setting latency timer to 64
usb usb2: root hub lost power or was reset
uhci_hcd 0000:00:1d.2: setting latency timer to 64
usb usb4: root hub lost power or was reset
uhci_hcd 0000:00:1d.3: setting latency timer to 64
usb usb5: root hub lost power or was reset
ehci-pci 0000:00:1d.7: setting latency timer to 64
ata_piix 0000:00:1f.1: setting latency timer to 64
ata2: port disabled--ignoring
ahci 0000:00:1f.2: setting latency timer to 64
i8042 kbd 00:05: System wakeup disabled by ACPI
serial 00:06: activated
hpet1: lost 11 rtc interrupts
ata8: SATA link down (SStatus 4 SControl 300)
ata7: SATA link down (SStatus 4 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
usb 4-1: reset low-speed USB device number 2 using uhci_hcd
ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata6.00: configured for UDMA/133
firewire_core 0000:0c:03.0: rediscovered device fw0
sd 5:0:0:0: [sda] Starting disk
usb 3-2: reset low-speed USB device number 2 using uhci_hcd
usb 5-1: reset full-speed USB device number 2 using uhci_hcd
snd-usb-audio 5-1:1.0: no reset_resume for driver snd-usb-audio?
snd-usb-audio 5-1:1.1: no reset_resume for driver snd-usb-audio?
PM: resume of devices complete after 1581.519 msecs
usb_audio: Warning! Unlikely big volume range (=9472), cval->res is probably wrong.
usb_audio: [13] FU [PCM Playback Volume] ch = 2, val = -9473/-1/1
PM: Finishing wakeup.
Restarting tasks ... done.
tg3 0000:0b:00.0: irq 66 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
tg3 0000:0b:00.0 eth0: Link is up at 100 Mbps, full duplex
tg3 0000:0b:00.0 eth0: Flow control is off for TX and off for RX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Corrupted low memory at ffff880000007bf8 (7bf8 phys) = 8000cfc0000
device eth0 entered promiscuous mode
conftest[5098]: segfault at 0 ip 00000000004005c0 sp 00007fffa641ce60 error 4 in conftest[400000+1000]
conftest[5127]: segfault at 0 ip 00007f1b5e66bbc6 sp 00007fffc6f8a3b8 error 4 in libc-2.17.so[7f1b5e527000+1bd000]
perf samples too long (5001 > 5000), lowering kernel.perf_event_max_sample_rate to 25000